Mitsubishi Pajero Pinin 1999 - Condenser and Condenser Fan Motor

HEATER, AIR CONDITIONER AND VENTILATION ±
Condenser and Condenser
Fan Motor
55-30
CONDENSER AND CONDENSER FAN MOTOR
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Under Cover Removal and Installation
Piping connection
3
4
5
6
7
8
9
10
11
12
12 Nm
10
Compressor oil:
ZXL 200PG
OĆring
1
2
12 Nm
12 Nm
Condenser assembly removal steps
D Discharging and charging of
refrigerant (Refer to P.55-10.)
D Radiator grille (Refer to GROUP 51.)
" AA 1. Receiver
2. Receiver bracket
3. Air intake duct
4. Fan motor and shroud assembly
8. Radiator fan motor and shroud as-
sembly (Refer to GROUP 14)
9. Condense tank
AA" 10. Discharge hose connection
11. Radiator mounting bolt
D Engine cover
(Refer to GROUP 11A.)
AB" 12. Condenser assembly
Condenser fan and motor assembly
removal steps
4. Condenser fan motor and shroud
assembly
5. Condenser motor and fan controller
assembly
6. Condenser fan
7. Condenser fan shroud