HEATER, AIR CONDITIONER AND VENTILATION ±
Condenser and Condenser
Fan Motor
55-31
REMOVAL SERVICE POINTS
AA" DISCHARGE HOSE DISCONNECTION
Plug the nipples of the disconnected pipe, hose and condenser
assembly to prevent foreign materials from entering.
Caution
Plug the nipples with material that is not permeable to
air as compressor oil and the receiver absorb water vapour
easily.
AB" CONDENSER ASSEMBLY REMOVAL
1. Remove the mounting bolts from the front side of the
headlamp support member.
2. Disengage the lower part of the radiator, and then move
the radiator slightly toward the engine.
3. Raise the condenser assembly to remove from the engine
compartment.
INSTALLATION SERVICE POINT
" AA RECEIVER INSTALLATION
Install the pipe coming from the condenser to the side stamped
ªINº.
INSPECTION
CONDENSER FAN CHECK
Terminals connected to battery
Condenser fan condition
1 2
Operates
To Next Page
Loading...
