ENGINE <4G9-GDI> ± Crankshaft Pulley
11A-16
CRANKSHAFT PULLEY
REMOVAL AND INSTALLATION
Pre-removal Operation
Engine Cover and Under Cover Removal
Post-installation Operation
D Drive Belt Tension Adjustment (Refer to P.11A-7.)
D Engine Cover and Under Cover Installation
(Engine oil)
1
2
3
4
177 ± 186 Nm
5
Removal steps
1. Drive belt (Power steering and A/C)
2. Drive belt (Alternator)
AA" " AA 3. Crankshaft pulley bolt
4. Crankshaft pulley washer
5. Crankshaft pulley
REMOVAL SERVICE POINT
AA" CRANKSHAFT PULLEY BOLT REMOVAL
INSTALLATION SERVICE POINT
" AA CRANKSHAFT PULLEY BOLT INSTALLATION
When installing the crankshaft bolt, apply the minimum amount
of engine oil to the bearing surface and thread of the bolt.
MD998719 or
MD998754
MD990767
To Next Page
Loading...
