Mitsubishi Pajero Pinin 1999 - Clutch Pedal Inspection and Adjustment; General Information; Lubricants; On-Vehicle Service

CLUTCH ± General Information/Service Specifications/Lubricants/On-vehicle Service
21-2
GENERAL INFORMATION
The clutch is a dry single-disc, diaphragm type;
hydraulic pressure is used for the clutch control.
SERVICE SPECIFICATIONS
Items Standard value
Clutch pedal height mm 212 ± 215 <L.H. drive vehicles>
202 ± 205 <R.H. drive vehicles>
Clutch pedal clevis pin play mm 1 ± 3
Clutch pedal free play mm 6 ± 13
Distance between the clutch pedal and the toeboard
when the clutch is disengaged mm
110 or more
LUBRICANTS
Items Specified lubricants Quantity
Clutch fluid Brake fluid DOT3 or DOT4 As required
Push rod assembly Rubber grease
Release cylinder push rod MITSUBISHI genuine grease
Part No. 0101011
ON-VEHICLE SERVICE
CLUTCH PEDAL INSPECTION AND
ADJUSTMENT
1. Turn up the carpet, etc. under the clutch pedal.
2. Measure the clutch pedal height and the clutch pedal clevis
pin play.
Standard value (A):
212 ± 215 <L.H. drive vehicles>
202 ± 205 <R.H. drive vehicles>
Standard value (B): 1 ± 3 mm
Clutch pedal height Clutch pedal clevis
pin play
A
B