EXTERIOR ± Exterior Parts/Moulding and Garnish
51-7
REMOVAL SERVICE POINT
AA" ROOF RACK COVER (FRONT, REAR) REMOVAL
1. Insert the special tool into the slit.
NOTE
The roof rack assembly has the slit.
2. Insert the special tool as far as possible and remove the
claw (front) by prying the roof rack cover toward you.
3. Remove the claw (rear).
Caution
Spread out the roof rack cover sufficiently and pull
it upward, otherwise the claws will be broken.
MOULDING AND GARNISH
SPECIAL TOOL
Tool Number Name Use
MB990449 Window moulding
remover
Removal of roof drip moulding.
View A
MB990784
Claw (rear)
Claw (front)
Slit
Slit
Claw (rear)
Claw (front)
View A
Outside of vehicle
To Next Page
Loading...
