FRONT AXLE ± Main Shaft
26-26
MAIN SHAFT
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Drive Shaft Removal and Installation (Refer to
P.26-19.)
D Free-wheeling Clutch Housing Assembly Removal
and Installation (Refer to P.26-45.)
D Gear Oil Draining and Refilling (Refer to P.26-11.)
4
5
88 Nm
2
98 ± 118 Nm
3
1
7
9
8
9
6
17 Nm
Sealant:
3M ATD Part No.8661 or equivalent
(Apply to the lip)
(Apply to the lip)
Removal steps
1. Vacuum pipe assembly
2. Vacuum hose assembly
3. Vacuum actuator assembly
4. Inner shaft assembly
5. Front housing assembly
" CA 6. Oil seal
AA" " BA 7. Bearing
8. Main shaft
" AA 9. Oil seal
To Next Page
Loading...
