STEERING ± Service Specifications/Lubricants/Sealant and Adhesive
37A-4
SERVICE SPECIFICATIONS
Item Standard value Limit
Steering wheel free play mm with engine running ± 30 or less
with engine stopped 0 ± 10 ±
_
'
_
eer
ng ang
e
nner w
ee
±
Outer wheel 32_10' ±
<For reference>
Ball joint turning torque Nm 0.5 ± 2.5 ±
Stationary steering effort N Steering effort 27 or less 30 or less
Fluctuation allowance 5.9 or less ±
p
p
p
pump re
e
pressure
a
.
±
Pressure under no-load condition MPa 0.2 ± 0.7 ±
Steering gear retention hydraulic
p
eer
ng gear re
en
on
y
rau
c pressure
a
.
±
Oil pressure switch operating pressure MPa OFF→ON 1.5 ± 2.0 ±
ON→OFF 0.7 ± 2.0 ±
Pinion total rotation torque Nm Total rotation torque 0.6 ± 1.5 ±
Torque variation 0.5 or less ±
Tie rod joint swing resistance N (Tie rod joint swing torque Nm) 5 ± 17 (1.5 ± 4.9) ±
Special tool aperture dimension (MB991561) mm 2.9 ±
Band crimped width mm 2.4 ± 2.8 ±
LUBRICANTS
Item Specified lubricant Quantity
Power steering Automatic transmission fluid DEXRON or DEXRON II Approx. 0.6 ȏ
Tie rod bellows Silicone grease As required
Pinion and valve assembly Repair kit grease As required
Rack assembly Repair kit grease As required
SEALANT AND ADHESIVE
Item Specified sealant Remarks
Rack support cover end plu
3M ATD Part No. 8661 or e
uivalent Semi-dr
in
sealant
.
-
Gear housing mounting rubber 3M ATD Part No. 8155 or equivalent Quick fix adhesive