CLUTCH ± Clutch Control
21-5
CLUTCH CONTROL
REMOVAL AND INSTALLATION
Pre-removal Operation
Clutch Fluid Draining
Post-installation Operation
D Clutch Fluid Supplying
D Clutch Line Bleeding (Refer to P.21-3.)
D Clutch Pedal Adjustment (Refer to P.21-2.)
<L.H. drive vehicles>
Release cylinder
push rod
Release fork
7
6
8
4
5
2
1
3
9
12 Nm
Specified grease:
MITSUBISHI genuine
grease Part No. 0101011
15 Nm
11, 13
5 Nm
19 Nm
13 Nm
13
5
10
11
12
13
20 ± 25 Nm
12 Nm
5 Nm
Clutch master cylinder assembly
removal steps
1. Clevis pin
2. Clutch pipe connection
3. Breather hose connection
4. Clutch master cylinder assembly
5. Sealer
Reservoir tank removal steps
3. Breather hose connection
5. Bolt
6. Reservoir bracket
7. Reservoir tank
8. Breather hose
Clutch release cylinder assembly
removal steps
9. Clutch pipe connection
10. Clutch release cylinder assembly
Clutch line removal steps
11. Clutch pipe
12. Bracket
13. Clutch hose
To Next Page
Loading...
