Mitsubishi Pajero Pinin 1999 - Lubricant; On-Vehicle Service; Sealants and Adhesives; Transmission Oil Change

MANUAL TRANSMISSION ± Lubricant/Sealants and Adhesives/On-vehicle Service
22-2
LUBRICANT
Items Specified lubricants Quantity ȏ
Transmission oil
Hypoid gear oil SAE 75W ± 90 or 75W ± 85W
conforming to API GL-4
2.4
Transfer oil
con
f
orm
i
ng
t
o
API
GL
-
4
2.2
SEALANTS AND ADHESIVES
Items Specified sealant Remarks
Contact surface between transmission and
transmission control lever, thread (except
outer surface) of stopper bracket assembly
installation bolts and transfer control lever
gasket
3M ATD Part No.8660 or equivalent Semi-drying sealant
Thread of stopper bracket assembly
installation bolts and thread of transfer
control lever assembly installation bolts
3M Stud Locking No.4170 or equivalent Anaerobic sealant
ON-VEHICLE SERVICE
TRANSMISSION OIL CHECK
1. Remove the oil filler plug.
2. Oil level should be at the lower portion of the oil filler
plug hole.
3. Check that the transmission oil is not noticeably dirty, and
that it has a suitable viscosity.
4. Tighten the oil filler plug to the specified torque.
Tightening torque: 29 ± 34 Nm
TRANSMISSION OIL CHANGE
1. Remove the oil drain plug to drain oil.
2. Tighten the oil drain plug to the specified torque.
Tightening torque: 39 Nm
3. Remove the oil filler plug and fill with specified oil till the
level comes to the lower portion of oil filler plug hole.
Specified oil:
Hypoid gear oil SAE 75W ± 90 or 75W ± 85W
conforming to API GL-4
Quantity: 2.4 ȏ
4. Tighten the oil filler plug to the specified torque.
Tightening torque: 29 ± 34 Nm
Transmission oil
Oil filler
plug hole
Oil filler
plug
Oil drain plug