REAR AXLE ± General Information/Service Specifications/Lubricants
27-3
CONSTRUCTION DIAGRAM
Axle shaft
Axle housing
Axle shaft
Differential
Brake disc
Vent plug
Wheel bearing
Oil seal
ABS rotor
SERVICE SPECIFICATIONS
Items Standard value Limit
Rear axle total backlash mm ± 4.2
Wheel bearing axial play mm ± 0.025
Final drive gear backlash mm 0.08 ± 0.13 ±
Drive gear runout mm ± 0.05
Differential gear backlash mm 0.01 ± 0.25 0.2
Drive pinion
turning torque
Without
oil seal
When replacing with a new
bearing (with rust-prevention oil)
0.59 ± 0.88 ±
m
When using a new bearing or
when reusing (gear oil application)
0.39 ± 0.49 ±
With oil
seal
When replacing with a new
bearing (with rust-prevention oil)
0.83 ± 1.13 ±
When using a new bearing or
when reusing (gear oil application)
0.64 ± 0.74 ±
LUBRICANTS
Items Specified lubricant Quantity
Gear oil Hypoid gear oil
API classification GL-5 or higher SAE viscosity
No. 90, 80W
Approx. 1.7 ȏ