HEATER, AIR CONDITIONER AND VENTILATION ±
Heater Control Assembly and
A/C switch
55-19
HEATER CONTROL ASSEMBLY AND A/C SWITCH
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Center Air Outlet Assembly, Instrument Under Cover
Removal and Installation (Refer to GROUP 52A ±
Instrument Panel.)
D Radio, Tape Player Removal and Installation (Refer
to GROUP 54.)
3
1
2
Removal steps
" BA 1. Air mix damper cable connection
" AA 2. Air outlet changeover damper cable
connection
3. Heater control assembly
INSTALLATION SERVICE POINTS
" AA AIR OUTLET CHANGEOVER DAMPER CABLE
CONNECTION
1. Set the air outlet changeover control knob on the heater
control assembly to the DEF position.
2. Set the air outlet changeover damper lever of the heater
unit to the DEF position (turn clockwise the damper lever
unit it stops), and then connect the cable to the lever.
" BA AIR MIX DAMPER CABLE CONNECTION
1. Set the temperature control knob on the heater control
assembly to the MAX HOT position.
2. Set the air mix damper lever of the heater unit to the
MAX HOT position (turn clockwise the damper lever until
it stops), and then connect the cable to the lever.
Air outlet changeover
damper lever
DEF position
Air mix damper
lever
MAX HOT
position
To Next Page
Loading...
