Mitsubishi Pajero Pinin 1999 - Page 325

AUTOMATIC TRANSMISSION ±
Troubleshooting <A/T Key Interlock and Shift
Lock Mechanisms>
23-33
INSPECTION PROCEDURE 3
Selector lever can be moved from P to R with brake pedal
depressed when ignition key is at LOCK (OFF) position.
Probable cause
Lock cam or key interlock cable may be defective. D Malfunction of lock cam
D Malfunction of key interlock cable
Check items described in the column ªProbable causeº.
INSPECTION PROCEDURE 4
Selector lever cannot be moved from P to R smoothly.
Probable cause
Key interlock cable, shift lock cable, lock cam, or selector lever assembly may be
defective.
D Malfunction of key interlock cable
D Malfunction of shift lock cable
D Malfunction of lock cam
D Malfunction of selector lever assembly
Check items described in the column ªProbable causeº.
INSPECTION PROCEDURE 5
Selector lever cannot be moved from R to P.
Probable cause
Selector lever assembly or transmission control cable may be defective. D Malfunction of selector lever assembly
D Malfunction of transmission control cable
Check items described in the column ªProbable causeº.
INSPECTION PROCEDURE 6
Ignition key cannot be turned to LOCK (OFF) position
when selector lever is at P position.
Probable cause
Lock cam, key interlock cable or key cylinder slider may be defective. D Malfunction of lock cam
D Malfunction of key interlock cable
D Malfunction of key cylinder slider
Check items described in the column ªProbable causeº.
INSPECTION PROCEDURE 7
Ignition key can be turned to LOCK (OFF) position when
selector lever is at positions other than P.
Probable cause
Lock cam, key cylinder cover or key interlock cable may be defective. D Malfunction of lock cam
D Malfunction of key cylinder cover
D Malfunction of key interlock cable
Check items described in the column ªProbable causeº.