AUTOMATIC TRANSMISSION ± Transmission Control
23-53
DISASSEMBLY SERVICE POINT
AA" POSITION INDICATOR SOCKET ASSEMBLY
REMOVAL
Use a flat-tipped screwdriver, etc. to remove the terminal of
shift knob side from the position indicator socket assembly
connector.
REASSEMBLY SERVICE POINT
" AA SLEEVE INSTALLATION
Shift the selector lever to the N position, and then turn the
sleeve so that the clearance between the sleeve and lever
assembly end is within the dimension shown in the illustration.
Terminal
Screwdriver
Sleeve
Selector
lever
assembly
16.0 ± 16.7 mm
To Next Page
Loading...
