PROPELLER SHAFT ± General Information/Service Specifications/Lubricant/Special Tool
25-2
GENERAL INFORMATION
A two-joint propeller shaft was used for both the front and rear.
SERVICE SPECIFICATIONS
Items Standard value Limit
Propeller shaft runout mm Front ± 0.5
Rear ± 0.4
Length of rear propeller shaft mm 630±1.5 ±
Clearance of snap ring
Front 0 ± 0.06 ±
groove mm
Rear 0.02 ± 0.06 ±
LUBRICANT
Items Specified lubricant Quantity
Front propeller shaft sleeve
yoke
Hypoid gear oil SAE 75W±90 or 75W±85W or 80W
conforming to API GL±4
As required
SPECIAL TOOL
Tool Number Name Use
MB990840 Universal joint
remover and
installer
Disassembly and reassembly of the universal
joint
To Next Page
Loading...
