FRONT AXLE ± Solenoid Valve, Vacuum Pipes and Vacuum Tank
26-49
REMOVAL SERVICE POINT
AA" PIN REMOVAL
1. Remove the one side of the dust cover from the vacuum
actuator assembly.
2. Align the pin with the pin hole of the collar, and then
drive out the pin with a punch.
INSTALLATION SERVICE POINTS
" AA VACUUM HOSE INSTALLATION
Connect the vacuum hoses, the solenoid valve and the
vacuum pipes according to their identification colours.
" BA CHECK VALVE INSTALLATION
Face the arrow mark to the vacuum side.
Collar
Dust cover
Pin
Solenoid
valve side
Vacuum side
Arrow mark indicating
ventilation direction
To Next Page
Loading...
