FRONT AXLE ± Front Differential Mount
26-51
DIFFERENTIAL MOUNT INSULATOR
REPLACEMENT
FRONT
1. Use the special tool to drive out the insulator.
2. Use the special tools and a press to press-fit the insulators
so that their hollow portion points to the shown direction
and the insulator protrudes evenly (Distance A is equal
to distance B).
REAR
1. Use the special tool to drive out the insulator.
2. Use the special tools and a press to press-fit the insulators
so that their hollow portion points to the shown direction
and the insulator protrudes evenly (Distance C is equal
to distance D).
MD999547
MB990947
MB990847
MB990981
A
B
MD999570
MB991318
MB991183
MB990843
D
C
To Next Page
Loading...
