REAR AXLE ± Differential Carrier
27-19
AF" DRIVE PINION ASSEMBLY/COMPANION FLANGE
REMOVAL
1. Make the mating marks on the drive pinion and the
companion flange in order to position the companion flange
correctly when assembling it.
Caution
Do not make mating mark on the surface that contacts
with the propeller shaft.
2. Use the special tool to remove the companion flange.
AG" DRIVE PINION REAR BEARING INNER RACE
REMOVAL
Use the special tools to remove the drive pinion rear bearing
inner race.
AH" OIL SEAL/DRIVE PINION FRONT BEARING
INNER RACE/DRIVE PINION FRONT BEARING
OUTER RACE REMOVAL
Use the special tool to remove the drive pinion front bearing
outer race, drive pinion front bearing inner race and oil seal.
AI" DRIVE PINION REAR BEARING OUTER RACE
REMOVAL
Use the special tool to remove the drive pinion rear bearing
outer race.
MB990810
Companion
flange
MB990339
MB990648
Drive pinion
rear bearing
outer race
MB990939
Drive pinion
front bearing
inner race
Drive pinion
front bearing
outer race
Oil seal
MB990939