ABS <4WD> ± Hydraulic Unit and ABS-ECU
35B-27
<R.H. drive vehicles>
15 Nm
2
3
1
4
3
5
Removal steps
1. ABS warning lamp relay
AA" 2. Harness connector
" AA 3. Brake pipe connection
AB" 4. Hydraulic unit and ABS-ECU
5. Hydraulic unit bracket assembly
REMOVAL SERVICE POINTS
AA" HARNESS CONNECTOR DISCONNECTION
Move the lock lever of the ABS-ECU connector as shown
in the illustration, and then disconnect the harness connector.
Hydraulic unit
and ABS-ECU
Lock lever
To Next Page
Loading...
