BODY ± Window Glass
42-15
REMOVAL SERVICE POINT
AA" QUARTER WINDOW GLASS REMOVAL
Remove the quarter window glass in the same manner as
for the windshild. (Refer to P.42-11.)
INSTALLATION SERVICE POINT
" AA WINDOW DAM/DUAL LOCK FASTENER/
QUARTER WINDOW GLASS INSTALLATION
1. Use a isopropyl alcohol to decrease the glass and body
surfaces where the window dam and dual lock fasteners
are installed.
2. Install the window dam.
3. Install the dual lock fasteners to the body flange in the
specified positions.
4. Install the dual lock fasteners to the windshield in the
positions corresponding to the ones on the body flange
where the dual lock fasteners have been installed.
5. Apply the primer and adhesive.
6. Install the glass in the same manner as for the windshield.
(Refer to P.42-12.)
Dual lock
fastener
Dual lock fastener
installation positions
Glass end line
Side panel
flange end line
Align the dual
lock fastener end
and the marking.
: Dual lock fastener installation positions
To Next Page
Loading...
