BODY ± Door
42-31
" BA REAR LOWER SASH INSTALLATION
Be sure to install the rear lower sash to the window rear sash
(at door) securely.
" CA DOOR INSIDE HANDLE INSTALLATION
1. Install the inside lock cable to the door inside handle as
follows:
(1) Install the inner cable end in the inside lock cable
to the clip in the door inside handle.
(2) Turn the inside lock knob to the door lock position.
(3) Install the outer cable end to the door inside handle
securely.
(4) Install the clip to the inner cable.
2. Install the inside handle rod to the door inside handle.
3. Install the door inside handle to the door.
INSPECTION
DOOR LOCK ACTUATOR CHECK
<Left side>
Rod position
Terminal No.
Rod operation
4 6
LOCK LOCK to UNLOCK
UNLOCK UNLOCK to LOCK
<Right side>
Rod position
Terminal No.
Rod operation
1 2 3 4 6
LOCK LOCK to UNLOCK
UNLOCK UNLOCK to LOCK
LOCK
UNLOCK
DOOR LOCK KEY CYLINDER SWITCH CONTINUITY
CHECK <Vehicles with central door locking system>
Passenger's side only
Switch
Terminal No.
position
1 2 3
LOCK
Neutral (OFF)
UNLOCK
Outer
cable end
Inner cable
Clip
Door inside handle
Inside handle rod
View A
Unlock
View B Unlock
Lock
A
B
Lock
<Left side>
<Right side>
To Next Page
Loading...
