SRS ± Air Bag Modules and Clock Spring
52B-39
<Front seat back assembly with side air bag module (Vehicles with side air bag)>
1
Side air bag module
Removal
AE" 1. Front seat back assembly
Installation steps
" AA D Pre-installation inspection
1. Front seat back assembly
D Negative (±) battery cable connection
" DA D Post-installation inspection
REMOVAL SERVICE POINTS
AA" DRIVER'S AIR BAG MODULE REMOVAL
After removing the clip shown in the illustration, disconnect
the connector.
Caution
1. The air bag module must not be measured with such
equipment as an ohmmeter, nor disassembled.
2. The removed air bag module should be stored in a
clean, dry place with the deployment surface facing
up.
AB" STEERING WHEEL REMOVAL
Caution
Do not hammer on the steering wheel. Doing so may
damage the collapsible column mechanism.
AC" CLOCK SPRING REMOVAL
Caution
The removed clock spring should be stored in a clean,
dry place.
Air bag module
Connector
Clip
MB990803
To Next Page
Loading...
