GDI ± General Information
13A-4
SELF-DIAGNOSIS FUNCTION
D When an abnormality is detected in one
of the sensors or actuators related to
emission control, the engine warning lamp
(check engine lamp) illuminates as a
warning to the driver.
D When an abnormality is detected in one
of the sensors or actuators, a diagnosis
code corresponding to the abnormality is
output.
D The RAM data inside the engine-ECU that
is related to the sensors and actuators can
be read by means of the MUT-II. In addition,
the actuators can be force-driven under
certain circumstances.
OTHER CONTROL FUNCTIONS
1. Fuel Pump Control
Turns the fuel pump relay ON so that current
is supplied to the fuel pump while the engine
is cranking or running.
2. A/C Relay Control
Turns the compressor clutch of the A/C ON
and OFF.
3. Fan Motor Control
The revolutions of the radiator fan and
condenser fan are controlled in response
to the engine coolant temperature and
vehicle speed.
4. Purge Control Solenoid Valve Control
Refer to GROUP 17.
5. EGR Control Servo Control
Refer to GROUP 17.
GENERAL SPECIFICATIONS
Items Specifications
Throttle body
Throttle bore mm 60
Throttle position sensor Variable resistor type
Throttle valve control servo Torque motor type
Engine-ECU Identification model No. E2T71575
Sensors
Air flow sensor Karman vortex type
Barometric pressure sensor Semiconductor type
Intake air temperature sensor Thermistor type
Engine coolant temperature sensor Thermistor type
Oxygen sensor Zirconia type
Accelerator pedal position sensor Variable resistor type
Accelerator pedal position switch Rotary contact type, within accelerator pedal position
sensor
Vehicle speed sensor Magnetic resistive element type
Inhibitor switch Contact switch type
Camshaft position sensor Magnetic resistive element type
Crank angle sensor Hall element type
Detonation sensor Piezoelectric type
Fuel pressure sensor Metallic membrane type
Power steering fluid pressure switch Contact switch type
To Next Page
Loading...
