HEATER, AIR CONDITIONER AND VENTILATION ±
Heater Control Assembly and
A/C switch
55-21
DISASSEMBLY AND REASSEMBLY
3
1
2
4
5
6
Disassembly steps
1. Knob assembly
2. Bulb harness
AA" 3. Air outlet changeover damper cable
AA" 4. Air mix damper cable
5. Heater control panel
6. Blower switch assembly
DISASSEMBLY SERVICE POINT
AA" AIR OUTLET CHANGEOVER DAMPER
CABLE/AIR MIX DAMPER CABLE REMOVAL
Insert a flat-tipped screwdriver into the control base clip from
inner side, and then remove the cable by lifting the claw part
of the clip.
Claw
part
Flat-tipped
screwdriver
To Next Page
Loading...
