HEATER, AIR CONDITIONER AND VENTILATION ± Ventilators
55-34
VENTILATORS
Caution: SRS
When removing and installing the floor console assembly from vehicles equipped with SRS, do
not let it bump against the SRS-ECU or the components.
2
3
4
5
6
5
6
1
Rear heater duct B removal steps
D Front scuff plate, cowl side trim and
center console assembly (Refer to
GROUP 52A ± Instrument Panel.)
D Floor console assembly
(Refer to GROUP 52A.)
D Front seat
(Refer to GROUP 52A.)
D Floor carpet
1. Under cover
2. Rear heater duct B
Defroster nozzle and distribution
duct removal steps
D Instrument panel
(Refer to GROUP 52A.)
3. Defroster nozzle assembly
4. Distribution duct assembly
Foot distribution duct and rear heater
duct A removal steps
D Floor console assembly
(Refer to GROUP 52A.)
D Instrument panel assembly
(Refer to GROUP 52A.)
D Blower motor
(Refer to P.55-25.)
5. Rear heater duct A
6. Foot distribution duct
NOTE
For the center air outlet assembly and the side air outlet
assembly, refer to GROUP 52A ± Instrument panel.
To Next Page
Loading...
