Morgana DocuMaster MFC - Introduction

1. Introduction - Introduction
2 Morgana DocuMaster MFC - Service Manual
1. Introduction
1.1 Introduction
The Morgana DocuMaster MFC (Multi-Feed Creaser) booklet making system
automatically gathers sheets of pre-collated, sequentially printed paper and transfers
them to an online bookletmaker to produce saddle stapled booklets with a
SquareBack™ finish. The MFC can be programmed to insert heavier cover-weight
stocks, and to crease individual sheets using the unique DynaTilt creasing mechanism,
which prevents the cracking of substrates and printed images when they are stapled
and folded. The DynaTilt mechanism registers each sheet and automatically adjusts
the creaser blade-set so that it is perfectly square to the sheet. An integral static
elimination system neutralises any charge present in the fed sheets before they enter
the gathering station in the base of the machine. When a complete set (book) has been
gathered it is automatically released into the online booklet making system where it is
stapled, folded, trimmed and given an optional SquareBack™ finish.
This service manual provides service information for the MFC machine. Service
information for the bookletmaker, trimmer and squareback is given in separate
manuals.