Morgana DocuMaster MFC - Service Manual 7
1. Introduction - Machine Covers
1.6 Machine Covers
The MFC has 2 types of covers:
• User access covers that are opened to clear a paper jam or for maintenance.
• Fixed covers that must be removed when included in a service procedure.
Warning: Be careful to avoid serious injury if you are working on the MFC when the
fixed covers are removed.
The user access covers are the:
• rear guard
• input guide.
The fixed covers are the:
• hinged top panel
• hinged front panel
• hinged rear panel
• motor cover
• electrical cabinet cover
• LH side covers
• RH side covers
• CAP rear panel
• gathering area centre guard.
To Next Page
