MTSX RSS CHANGE/VIEW
68P81074C50 6-67
Talk Permit Tone
Enable this option if you want the Talk Permit tone every time the PTT is pressed. The talk permit tone is a series
of three quick tones that sound once the PTT button has been pressed and your radio has keyed up on the voice
channel assigned by the trunked central controller. You may begin talking immediately.
Time -Out Timer
The radio contains four Time-Out Timers. You may select one of the four timers. The values for the timers can be
changed on the CHANGE/VIEW:RAD CONFIG:RAD WIDE:MORE OPTIONS screen.
Factory default is 60 sec.
Private Call Type
Enable this field if you want the radio to be able to initiate Trunked Private Call.
Use the up/down arrow keys to select the desired PRIVATE CALL type.
The valid possibilities in this field are DISABLED, ENHANCED, PC II, and Advanced. ENHANCED is the only
valid type for 900 Mhz radios and it is not allowed on any other band. Only PC II is allowed for 800 Mhz Type II
and Type IIi personalities. For Type I personalities both type PC I and PC II private calls can be made so PC I or
PC II can be chosen, or PCI/PCII if both types of private call will be made from this personality.
Operation
Use the up/down arrow keys to select the operation of the Private Call feature for this personality.
Response Only - Allows the radio to accept calls only.
List Only - Allows the radio user to make calls from the call list. [For non-keypad models this option
can ONLY be used with the One Touch Button Feature (Main Menu-F4/F4/F3/F9/F5)].
Unlimited - Allows the radio to make calls from the call list and from the keypad. This also allows the
radio user to modify the call ID list. (requires full keypad)
Disabled - No Private Call operation is allowed.
Call Alert Operation
Call Alert allows the operator to receive pages and to transmit pages either by typing in a 6-digit Decimal ID
(Unlimited) or by selecting one of the IDs in the Trunking Call ID list (List Only).
Response Only - Allows the radio to accept pages only.
List Only - Allows the radio user to send pages from the call list. [For non-keypad models this option
can ONLY be used with the One Touch Button Feature (Main Menu-F4/F4/F3/F9/F5)].
Unlimited - Allows the radio to send pages from the call list and from the keypad. This also allows
the radio user to modify the page ID list. (requires full keypad)
Disabled - No Call Alert operation is allowed.
Select Response Only to only receive pages. Select Disabled to disable paging facilities.
Phone Interconnect
This option allows the radio to initiate and receive land-to-portable telephone calls and specifies the type of
interconnect. Choices are:
Answer Only - Allows the radio to accept calls only.
List Only - Allows the radio to make calls only from the phone list. [For non-keypad models this
option can ONLY be used with the One Touch Button Feature (Main Menu-
F4/F4/F3/F9/F5)].
Unlimited - Allows the radio to make calls from the phone list and from the keypad. This also allows
the radio user to modify the phone list. (requires full keypad.).
Disabled - No phone operation is allowed.
To Next Page
Loading...
Need help?
General
