: Default
BASIC SERVICE SETTING DATA
180 Ringing cadence on Automated Attendant call, DID call and
DISA call
[Other than North America]
0
1
Special Ringing for Multiline Termi-
nal See CM08>397
As per CM04 Y=00>06 for Single
Line Telephone
As per CM35 Y=033 or CM76 Y=22
Ringing cadence on Automated Attendant call, DID call and
DISA call
[North America Only]
0
1
Special Ringing for Multiline Termi-
nal
0.25 seconds ON-0.125 seconds OFF
-0.25 seconds ON-0.125 seconds OFF
-0.25 seconds ON-2 seconds OFF
As per CM04 Y=00>06 for Single
Line Telephone
As per CM35 Y=033 or CM76 Y=22
181 Multiline Terminal/DSS Console One-Touch key calling while
another party being rung, or while talking with another party
0
1
Not available
Available
185 When the transferring station goes on-hook before the called
station answers for Call Transfer-All Calls service, if the trans-
ferred call remains unanswered for a preprogrammed duration,
the transferring station is recalled.
Recall timing: See CM41 Y=0>07
0
1
Not available
Available
187 Recall priority over Call Forwarding 0
1
Recall is higher
Call Forward is higher
193 Sender prepause for C.O. outgoing call
(Not used with LCR)
0
1
To provide
Not provided
194 Sender prepause for Tie Line outgoing call 0
1
To provide
Not provided
199 Line Preselection on a Multiline Terminal
Off-hook/Speaker key is required after pressing the desired
Line/Trunk key.
0
1
Not required
Required
NOTE: When pressing the Line/Trunk key while terminated a call, Caller ID can be confirmed on the LCD with-
out answering the call.
Continued on next page
To Next Page
Loading...
