Name: NETGEAR D6220
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

9. If the Configuring the Internet Connection page does not display, do the following:

a. In the address field of the web browser, enter www.routerlogin.net.

b. When prompted, enter admin for the user name and password for the password.

If the Configuring the Internet Connection page displays, skip to Step 11. If the page still does not display,

see Step 10.

10. If the browser cannot display the web page, do the following:

a. Make sure that the computer is connected to one of the four Ethernet LAN ports or over WiFi to the

modem router.

Make sure that the Power LED of the modem router is lit solid green.

c. Make sure that your browser does not cache the previous page by closing and reopening the

browser.

d. Clear the browser cache.

e. If the computer is set to a static (fixed) IP address (this setting is uncommon), either change the

computer to obtain an IP address automatically from the modem router through DHCP, or change

the IP address of the computer to a static IP address in the 192.168.0.2–192.168.0.254 range.

11. From the Country menu, select the country in which you use the modem router.

12. From the Internet Service Provider menu, select the Internet service provider (ISP) that you are using.

If your ISP is not in the menu, select Other.

13. Select the Yes radio button.

14. Click the Next button.

Install and Access the Modem Router and Its Network

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Other manuals for NETGEAR D6220

Questions and Answers:

Need help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

General