Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 295
— loopback {bidir-b | bidir-e}
—no loopback
— multi-drop {disabled | slave | master}
— parity {odd | even | mark | space}
—no parity
— [no] report-alarm [hcmOof | hcmRai]
— s-bit-signaling {on | off}
— [no] shutdown
— socket socket-id
— description description-string
—no description
— encap-type encap-type
— rx
— eop
— idle-timeout milliseconds
— length bytes
— special-char value
—no special-char
— squelch-delay seconds
—no squelch-delay
— squelch-reset
— unsquelch-delay seconds
—no unsquelch-delay
— [no] shutdown
— tx
— inter-session-delay milliseconds
— speed {600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 56000 |
57600 | 115200}
— stop-bits {1 | 2}
— [no] v35
— [no] channel-group channel-group-id
— cisco-hdlc
— down-count down-count
—no down-count
— keepalive time-interval
—no keepalive
— up-count up-count
—no up-count
— crc {16 | 32}
— description description-string
—no description
— encap-type {cem | ipcp | frame-relay | hdlc | cisco-hdlc}
—no encap-type
— frame-relay
— lmi-type {ansi | itu | none | rev1}
— mode {dce | dte | bidir}
— n391dte intervals
—no n391dte
— n392dce threshold
—no n392dce
— n392dte threshold
—no n392dte
— n393dce count
—no n393dce