Chapter 7 Using Workbooks and off-line programming 101
ICS Remote Tools User Guide
3 You can perform any of the following actions:
Table 7 OLP Error dialog fields
Field Description
Sheet This field displays the name of the worksheet where the selected
error occurred.
Value This is the current value entered in the indicated cell.
Errors This is a description of the actual error. To view details, double click
on the error line or select the error line and click the Goto button. The
ICS workbook is displayed with the appropriate worksheet in view,
and the cell where the error occurred is highlighted.
Cell This is the cell on the worksheet where the error occurred.
Warning: The references to cells found in acquisition errors are not
useful. They are generated when the tool cannot find an appropriate
cell in which to place the acquired data. This often indicates an
overflow situation. For example, if an ICS is programmed with more
than 10 overrides, overrides with index 11 or higher show up as
errors, because the workbook only has space for the first 10
overrides.
View error details Double click on the error line or select the error line and click the
Goto button. The ICS workbook is displayed with the appropriate
worksheet in view, and the cell where the error occurred is
highlighted.
Saving the errors to the
workbook
Click on Save.
The Error list is automatically saved to a worksheet, called Errors, in
the ICS workbook.
Warning: The error information you save overwrites any previous
error information saved in the workbook.
Correcting the value
directly
To change an error found in a cell without opening the workbook:
1. Select the contents of the Value box in the OLP Errors dialog box
2. Enter the correct information.
3. Click on Save.
Exit the dialog Click on Close.
To Next Page
Loading...
