Chapter 6 Understanding the Browser tool 77
ICS Remote Tools User Guide
Message: <item> cannot be accessed at this time. Try later.
Explanation: You cannot view or change the programming item because the ICS is busy.
Suggested response: Continue with other programming tasks and return to the item later.
Fatal error messages
If you click OK or EXIT in a fatal error message window, the Browser tool window is closed. To
restart the tool, click on the Browser icon or select the Browser tool from the Run Tool menu.
Message: There is not enough memory to continue the current application.
Please close any other applications not in use and restart this
application.
OR
Out of memory.
Explanation: The Browser tool has run out of memory.
Suggested response:
1 Click OK. The Browser window disappears.
2 Close any other applications running on your computer.
3 Click the Browser tool icon or select the Browser tool from the Run Tool menu.
Message: Installation error #<x>. Please contact your system
administrator.
Explanation: Files in the ICSRT application are damaged.
Suggested response: Restore the corrupted file by re-installing Norstar Remote Utilities. If
this error occurs after ICSRT has been re-installed, contact Nortel technical assistance and
give them the error number.
Message: Internal application #<x>. Please contact your system
administrator
.
Explanation: An error internal to the application has occurred.
Suggested response: Contact Nortel technical assistance and give them the error number.
Message: The RAD functionality is not enabled at the <target> system of
the <selected> customer. Proper software keys need to be obtained and
entered through a set administrative session (F**CONFIG).
Explanation: You have tried to connect to a Compact ICS using the internal remote access
device (I-RAD), but the I-RAD has not been enabled.
To Next Page
Loading...
