56 Chapter 5 Understanding the Remote Set tool
N0004999 01
Explaining the Remote Set tool
Using the Remote Set tool allows you to read and modify the system data of the Norstar system to
which you are connected. When your computer has an online connection with the Norstar system,
any programming changes you make are either immediate, or take effect when you end the
programming session.
The Remote Set tool can be used to program any Norstar system running version 2.0 or newer
software.
You can use the Remote Set tool to:
• create and change programming of a Norstar system using the two simulated telephone types
• copy DNs (directory numbers) and lines within a system
• remotely administer an external remote access device (RAD) on MICS systems or an internal
remote access device (I-RAD) on CICS systems
• deal with direct queries of device status
• access Feature **DEBUG sessions
• provide access to and remotely program Voice Mail features, except those requiring voice
capability
• remotely program Station Message Detail Recording (SMDR), Door Phone and other
peripherals that use the telephone for programming
To Next Page
Loading...
