Oce TCS400 - Page 102

102 Océ TCS400 User manual
The 'Destination properties' dialog box opens.
[31] The Destination propertie s dialog box
[31] The Destination properties dialog box
3 Enter a name for the destination in the 'Name' text box.
This name will appear on the scanner panel.
4 From the 'Type' drop-down list box, select 'On the controller'.
5 Enter a path of the target folder in the 'Path' text box.
You can also click the 'Browse' button to select the path.
6 Click 'OK' to accept the destination properties.
Create a network destination with SMB
1
Create a shared folder on a workstation. For example c:\Scan.
2 From the 'File' menu on the Océ Scan Manager, select 'New'.
You can also click the 'New' button on the toolbar.
The 'Destination properties' dialog box opens.
3 From the 'Type' drop-down list box, select 'SMB'.
4 Enter the system name of the workstation where you created the shared folder
in the 'System' text box.
Note: Find the system name of the workstation on the control panel of the
workstation (Control panel - Network - Identification - System name)