Oce TCS400 - Manage Destinations

104 Océ TCS400 User manual
Manage destinations
Introduction
You can do the following to manage the destinations.
■ Lock a destination.
■ Unlock a destination
■ Delete a destination
■ Change the destination properties.
Purpose
When you lock a destination, an anonymous user cannot change the
destination properties.
Lock or unlock a destination
1
Select a destination.
2 From the 'File' menu, select 'Properties'.
You can also click the 'Properties' button on the toolbar.
3 Check the 'Locked' check box.
Uncheck the 'Locked' check box to unlock the destination.
4 Click 'OK' to accept the destination properties
Delete a destination
1
Log on to the key operator mode or the repro operator mode.
2 Select a destination.
3 From the 'File' menu, select 'Delete'.
You can also click the 'Delete' button on the toolbar.
The selected destination is deleted.
Note: You cannot delete the last destination.