Oce TCS400 - Introduction to How to Manage Your Jobs

152 Océ TCS400 User manual
Introduction to how to manage your jobs
This chapter describes the actions you can perform to manage your jobs. You
can perform the following actions on the Océ TCS400.
■ Delete or stop a job
■ Feed originals on the scanner
■ Set the 'Original release mode'
■ Cut the output
■ Clean cut a roll of media
■ Change the media type
■ Change the default drying time
■ Use the fallback mode to adapt the print speed to compensate for failing
printheads
■ Use the 'Overnight printing' feature to print for a long period without
operator attendance, for example outside office hours.