Oce TCS400 - The Océ TCS400 Users

Introduction 13
The Océ TCS400 users
Introduction
The Océ TCS400 has the following types of users:
■ Common user
■ Repro operator
■ Key operator
■ System administrator.
Common user
The common user is a person who uses the system for print jobs, copy jobs or
scan to file jobs. The common user has no permissions to change the system
settings. The Océ Power Logic
®
controller software does not authenticate the
common user. Therefore the common user is referred to as an anonymous user.
In order to be consistent with the Océ Power Logic
®
controller software, the
common user is referred to as an anonymous user in this manual.
Repro operator
The repro operator is responsible for the daily use of the Océ TCS400 in a
central repro department. The repro operator has no permissions to change the
settings in the Océ Settings Editor. In the Océ Queue Manager the repro
operator has the same permissions as the key operator. In the Océ Scan
Manager the repro operator can delete destinations and files.
Key operator
The key operator is responsible for the user maintenance and the system
settings of the Océ TCS400.
The key operator has the permission to define the key operator settings in the
Océ Settings Editor.
The key operator has full permission in the Océ Queue Manager, the Océ
System Control Panel, and the Océ Scan Manager.