132 Océ TCS400 User manual
Tone scale area check
How to make a tone scale area print
The system prints the 'Tone scale area check' print in the 'Presentation' quality
mode and the 'Area fills' content mode. The system uses a minimum of media
for the 'Tone scale area' print. You are recommended to use Premium coated
paper for the 'Tone scale area check' print.
Do the following to make a tone scale area print.
1 Scroll to the 'System information' card on the on-line screen of the printer
operator panel.
2 Use the lower softkey for 'Demo prints' to enter the menu.
3 Use the lower softkey to select 'Tone scale area check'.
Check the output for the problems with the quality described below.
To Next Page
Loading...
