Oce TCS400 - Check the Quality of the Printed Output; Quality Check Print

Ensure the best quality output 129
Check the quality of the printed output
Quality check print
Introduction
The Océ TCS400 offers two possibilities to check the quality of your printed
output.
■ Make a quality check print
■ Make a tone scale area print
■ Make a demo print.
This section describes the problems you can analyze by making a quality check
print or demo print. The 'Optimize print quality' section describes how you can
solve problems with the quality (see ‘Use the Optimize print quality wizard’
on page 141).
How to make a quality check print
The system prints the 'Quality check' print in the 'Presentation' quality mode
and the 'Lines & Text' content mode. The system uses a minimum of media for
the 'Quality check' print. We recommend you use Premium coated paper for the
'Quality check' print.
Do the following to make a quality check print.
1 Scroll to the 'System information' card on the on-line screen of the printer
operator panel.
2 Use the lower softkey for 'Demo prints' to enter the menu.
3 Use the lower softkey to select 'Quality check'.
Check the output for the problems with the quality described below.