116 Océ TCS400 User manual
Introduction to how to ensure the best quality output
Introduction
This chapter describes how to make sure you have the best quality for your
print jobs, scan-to-file jobs and copy jobs.
It is important to know that the quality of your copy output depends on both
the scan quality of the scanner and the print quality of the printer.
■ The Océ TCS400 offers several methods that help you to define the best
print mode for your job. These methods are described in the 'Output modes'
section of this chapter.
■ The Océ TCS400 has 3 methods that help you to identify and analyze
changes in the output quality, the 'Quality check' print, the 'Tone scale area
check' print, and the 'Demo print'. The 'Check the output quality' section of
this chapter describes these 3 methods.
■ When you find problems with the output quality, the 'Optimize the output
quality' section of this chapter helps you to correct the problems. (see ‘Use
the Optimize print quality wizard’ on page 141).
Remember that the output quality depends on the following:
■ Media type
(see ‘Change the type of media defined on the printer’ on page 164)
■ Output mode
(see ‘Introduction to the output modes’ on page 118)
■ Room temperature and humidity.
When to do
Only perform actions to optimize the output quality based on the information
supplied in the 'Check the output quality ' section.
To Next Page
Loading...
