Océ Power Logic® controller: Océ Settings Editor 229
Save, load, and print the settings
Introduction
It is possible that you need different settings for different customers,
departments or other conditions. For this reason, you can save the settings to a
file and then load the settings from a file.
The Océ TCS400 has the following special files for your use:
1 Backup.kos/Backup.sas
These files contain the previous values for the key operator settings and the
system administrator settings before the last 'Apply'.
2 Current.kos/Current.sas
These files contain the values for the key operator settings and the system
administrator settings after the last 'Apply'.
If you need a complete overview of all settings defined in the Océ Settings
Editor, you can print a list of all current settings.
How to save the settings to a file
1
From the 'File' menu, select 'Save as'.
You can also click the 'Save as' button on the toolbar.
If the client is a local client, the screen displays a dialog box. The user can enter
a file name. The file is saved in the specified directory on the system.
If the client is a remote client, the screen displays a dialog box. The user can
enter a directory name and a file name.
Note: Repro operators and anonymous users are not authorized to save the
settings to a file.
To Next Page
Loading...
