Oce TCS400 - Page 230

230 Océ TCS400 User manual
How to load the settings from a file
1
From the 'File' menu, select 'Open'.
You can also click the 'Open' button on the toolbar.
The screen displays a dialog box from where you can browse to the required
file.
2 Click the 'Apply' button.
The settings are transferred to the system.
If you are logged on as a key operator, the system only loads the KO settings.
If you are logged on as a system administrator, the system only loads the SA
settings.
Repro operators and anonymous users are not authorized to load the settings
from a file.
How to print a list of the current settings
1
From the 'System' menu in the Océ System Control Panel, select 'Print
settings'.
A list of the current settings on the Océ Power Logic
®
controller is printed.