Manage jobs on the Océ TCS400 175
Drying times
Typical drying times
Introduction
The printer automatically adapts the default drying time. The default drying
time depends on the following:
■ The media type
■ The ambient humidity
■ The print mode.
Of you print grayscale in the 'Check' quality mode, the system decreases the
drying time to 20% of the default value.
You can change the drying time for all the media types. You can select a
percentage of 0% - 999% of the default drying time (see ‘Change the default
drying time’ on page 177).
Typical drying times per media type
The following table describes typical drying times for Océ media under
standard conditions (22 °C, 50% relative humidity):
To Next Page
Loading...
