60 Océ TCS400 User manual
Introduction to how to do copy jobs on the Océ TCS400
This chapter contains all the information you need to perform copy jobs from
the Océ TCS400 scanner. You can learn more about the following:
■ How to define the job settings
■ How to start a job.
The 'Important copy settings' section in this chapter describes the settings that
need special attention and which are not described anywhere else in this
manual.
The chapter 'Ensure the best quality output' describes how to use the settings
that control the image quality on the output.
The on-line help in the Océ Settings Editor gives complete information about
the different settings.
After you start the jobs on the scanner, you can manage the jobs from the Océ
Queue Manager.
You can stop or delete the copy jobs from the scanner operator panel.
When the printer processes the job, you can also stop or delete the jobs from
the printer operator. panel.(see ‘Introduction to how to manage your jobs’ on
page 152)
To Next Page
Loading...
