Use Océ Scan Manager for your scan-to-file jobs 101
Use the Océ Scan Manager
Create destinations
Introduction
You can scan to file to the following types of destination.
■ Local
The local destinations are temporary and can only contain a small number
of scanned files. Use the SA - System - Set memory reservation setting in
the Océ Settings Editor to define the available space on the controller for
scanned files.
■ A network destination with SMB
■ An internet destination with FTP.
You can create a maximum number of 10 destinations.
Note: You can only enter names in Japanese for remote destinations in SMB.
Create a local destination
1
Select 'Destinations' in the tree structure.
2 From the 'File' menu, select 'New'.
You can also click the 'New' button on the toolbar.
To Next Page
Loading...
