Oce TCS400 - Introduction to Océ Remote Logic

252 Océ TCS400 User manual
Introduction to Océ Remote Logic®
The applications of Océ Remote Logic®
You must use Océ Remote Logic
®
to connect to the Océ Power Logic
®
controller applications if you do not have a keyboard, mouse and monitor with
your Océ Power Logic
®
controller.
You can use Océ Remote Logic
®
to run the following applications from a
remote workstation:
■ Océ Settings Editor
Use the application to change the default settings of the system.
■ Océ Queue Manager
Use the application to manage the print jobs.
■ Océ System Control Panel
Use the application to view the status of the printer, the scanner and the
controller. You can also view the media available on the printer and the
amount of set memory in use.
User modes
The Océ Remote Logic
®
controller applications have different user modes (see
‘The Océ TCS400 users’ on page 13). An additional user mode is the 'Service
operator' mode. This mode is for the Océ technician only.