Oce TCS400 - Output Modes; Introduction to the Output Modes

118 Océ TCS400 User manual
Output modes
Introduction to the output modes
Introduction
The Océ TCS400 enables you to select the correct mode for your output
requirements. You can select the following modes:
■ Modes related to color
■ Modes related to the output quality
■ Modes related to file content
■ Modes related to image type.
When you perform print jobs, define the required output modes in the printer
driver.
When you do copy jobs, define the required output modes on the 'Image' card
on the scanner operator panel.
Define the default output modes in the Océ Settings Editor.
Modes related to color
Use this setting to define the color mode of the Océ TCS400. You can select
the following:
[16] The color modes
[16] The color modes
Color mode Function
'Color' The Océ TCS400 prints the jobs in full color.
Use this setting when the image on the original is in color
and the printed output requirement is color.
'Grayscale' The Océ TCS400 prints the jobs in grayscale.
Use this setting when the image on the original is in color
and the printed output requirement is greyscale.
Use this setting when the image on the original is grey-
scale.