Maintenance 183
Maintenance activities for the printer
Replace the ink tanks
Introduction
The Océ TCS400 contains the following four ink tanks:
■ One tank for the cyan ink. Capacity 400 ml.
■ One tank for the magenta ink. Capacity 400 ml.
■ One tank for the yellow ink. Capacity 400 ml.
■ One tank for the black ink. Capacity 400 ml.
The ink level card on the printer operator panel indicates the ink level of each
color as a percentage.
You can replace the ink tanks at any time. A wizard is not required.
When to do
You must replace an ink tank in the following situations:
■ The ink level indicator on the printer operator panel displays 0%. The
indicator flashes when the ink tank is empty. If you replace the ink tank, the
printer can continue to print on the ink present in the system.
■ A pop-up message appears on the screen and displays the message 'Out of
[color] ink. Replace ink tank'. The system produces a double audio signal.
The red LEDs of the printer operator panel remain illuminated. The printer
stops. Immediate action is required.
To Next Page
Loading...
