Oce TCS400 - Introduction to the Océ Power Logic Controller: Océ Settings Editor

218 Océ TCS400 User manual
Introduction to the Océ Power Logic® controller: Océ Settings
Editor
Introduction
This chapter gives information about the Océ Settings Editor. The on-line help
of the Océ Settings Editor application contains exact information about
specific settings.
You can access the Océ Settings Editor locally on the controller if you have a
keyboard, mouse and monitor with your Océ Power Logic
®
controller. You
must use Océ Remote Logic
®
to connect to the Océ Settings Editor if you do
not have a keyboard, mouse and monitor with your Océ Power Logic
®
controller.
Description of the Océ Settings Editor
Use the Océ Settings Editor to define the default settings for the system
according to your requirements. The Océ Settings Editor includes the
following types of settings:
■ Key Operator settings (KO settings)
■ System Administrator settings (SA settings).
A password protects the KO settings and the SA settings. Without a password,
you can only view the settings.
The key operator is allowed to change the following groups of settings (see
‘Define the settings in the Océ Settings Editor’ on page 228):
■ Job settings for the print jobs
■ Printer settings
■ System settings.