Oce TCS400 - Manage the Scanned Files

Use Océ Scan Manager for your scan-to-file jobs 107
Manage the scanned files
Introduction
The right-hand pane of the destination area displays information about the
scanned files.
You can do the following to manage the scanned files.
■ View a scanned file''
When 'Auto view' is enabled, Océ View Station LT starts automatically to
display the scanned file when the scan to file is complete.
■ Print a scanned file
■ Delete a scanned file
■ View the properties of a scanned file.
View a scanned file
1
Select a file.
2 From the 'File' menu, select 'View'.
You can also click the 'View' button on the toolbar.
[32] The View but ton on t he toolbar
[32] The View button on the toolbar
Océ View Station LT starts and displays the file
Enable Auto view
1
From the 'System' menu, select 'Auto view'.
A check mark in the menu in front of 'Auto view' indicates that 'Auto view' is
enabled.
Print a scanned file
1
Select a file.
2 From the 'File' menu, select 'Print'.
You can also click the 'Print' button on the toolbar.
[33] The Print button on the toolbar
[33] The Print button on the toolbar
The system prints the selected file with the default settings defined in the Océ
Settings Editor.